Browsing Tag

Planner Essentials – 4

Joset Designs Planner Essentials

In The Jungle

June 17, 2022

Karen here. I’m creating a Planner Essentials book of my guy’s dog as a present to him. Sadie! She absolutely loves going through long walks and wanders through the tall grass trying to find critters to chase. I thought I’d use the Slimline Adventure Edges to create grass on the edge of my planner page!

I created the page by cutting a Planner Essentials 4 die using beige cardstock. I then put the Slimline Adventure Edges (Grass) and cut the edge. I also cut the edge from a pretty green cardstock that i had and trimmed it up close. I added the green die cuts to the edges on both sides of the planner pages.

I love how it came out. I also added with embellishment die cuts from the Floral Insert and Flower Power. I used a multiliner pen to outline the flowers. The letters are from the Planner Essentials 23. Cutting the letters and flowers with 101mm Double Sided Adhesive is so helpful in ensuring that these items with such thin lines are easy to adhere.

The back of the beige cardstock was dark grey. I love how the pretty purples and greens pop on this side including the fun reinforcements from the Reinforcement Variety Packs 1 and 2.

Thank you for stopping by today!

Craftily yours, Karen

Supplies from Elizabeth Craft Designs

Other Supplies

Plain and patterned cardstock, multiliner pen

Cardmaking Charlene Stamps Inspiration from the Design Team Stamping

Hand Stamped Printed Paper

May 27, 2021

Hey Friends! It’s EK, and today I am popping in and sharing a few cards I created using hand stamped printed paper I created using Ilse and Charlene’s Stamps and Stencils. I love how you can created exactly the ‘printed’ paper you need using simply papers and monochromatic color scheme.

Step One: Using a diagonal line, hand stamp a fauna stamp from the Spring Fling stamp set onto Watercolor paper using colored ink. I used Rustic Wilderness Distress Oxide.

Step Two: Finish stamping the fauna in a diagonal pattern, alternating the direction of the stamp with each line.

Step Three: Spray the images with water, and set with a heat gun.

Step Four: Blend a lighter shade of ink through the Dot Dot Dot stencil and blend extra ink around the edges of the watercolor paper. I used Shabby Shutter Distress Oxide.

Step Five: Repeat step one using three of the flower stamps from the Spring Fling stamp set in a new shade of ink. I used Speckled Egg Distress Oxide.

Step Six: Repeat step two, finishing the diagonal stamping.

Step Seven: Repeat step three, spraying the ink with water. This one did not bleed as much as the others.

Step Eight: Repeat step four, blending ink through the Waves stencil and around the edges. I used Speckled Egg Distress Oxide for the background as well as the stamping.

Step Nine: Repeat step one using the Poppy Dream stamp set. I used Barn Doors Distress Oxide.

Step Ten: Repeat step two, and finish the stamping. Can you tell which row I messed up on?

Step Eleven: Repeat step three, spraying the ink with water.

Step Twelve: Repeat step four, blending a lighter ink through the Make Your Mark stencil. I used Abandon Coral Distress Oxide.

Step Thirteen: Repeat step one using a different stamp from the Poppy Dream stamp set. I used Crackling Fire Distress Oxide.

Step Fourteen: Repeat step two, and finish the stamping.

Step Fifteen: Repeat step three, spraying the ink with water. I really love how this one bleed.

Step Sixteen: Repeat step four, blending a lighter ink through the Make Your Mark stencil. I used Dried Marigold Distress Oxide.

Step Seventeen: Repeat step one using the Journaling Elements stamp set. I used Worn Lipstick Distress Oxide.

Step Eighteen: Repeat step two, and finish the stamping. On this printed paper, I added a second row using one of the sentiments from the stamp set.

Step Nineteen: On this printed paper, I added a second row using one of the sentiments from the stamp set.

Step Twenty: Repeat step three, spraying the ink with water.

Step Twenty One: Repeat step four, blending a lighter ink through the hearts on the Make Your Mark stencil. I used Spun Sugar Distress Oxide for an almost water mark look.

Step Twenty Two: Repeat step one using the Journaling Elements stamp set and the oversized sentiment ‘perfect’. I used Dusty Concord Distress Oxide. I added a second row of stamping using Milled Lavender and the paint brush strip stamp.

Step Twenty Three: For this printed paper, I added a third layer of stamping using the dash stamp set in Seedless Preservers Distress Oxide.

Step Twenty Four: Repeat step three, spraying the ink with water.

Step Twenty Five: Repeat step four, blending a lighter ink through the dash marks on the Make Your Mark stencil. I used Milled Lavender Distress Oxide again, loving how it blended into the stamped image of that same color.

Step Twenty Six: Die cut all six of the ‘printed’ papers using the Stitched Rounded Rectangle die set.

Step Twenty Seven: Using 10mm Clear Double Sided Adhesive, adhere the ‘printed’ papers onto A2 card frames.

Step Twenty Eight: Die cut black and white sentiments for the hand stamp ‘printed’ papers. I used a collection of planner die sets to create my sentiment die cuts. They are from the Planner Essentials 1, Planner Essentials 2, Planner Essentials 4, Planner Essentials 7, Planner Labels, and Retro Label Sayings stamp set. Adhere the sentiments to each of the cards.

Card One

Card Two

Card Three

Card Four

Card Five

Card Six

Do you ever created your own printed paper? Let us know in the comments below. Until then, happy crafting.


Elizabeth Craft Designs General Joset Designs Planner Essentials Soft Finish Cardstock

You Will Never Know the Value Planner Page

April 28, 2020

Hey Crafters! Katelyn here, sharing with you my You Will Never Know the Value Planner Page.

To create my planner page, I’ve used a variety of the dies from the Planner Essentials Collection as well as dies from Joset Designs. You’ll want to read below as I share with you how to recreate my page at home.

Step One. Die cut the page from the Planner Essentials 27 – Retro Number Trio out of White Soft Finish Cardstock. Cut the page down to 7 1/4″ tall. Spray Distress Spray Stain in Mermaid Lagoon, Abandoned Coral and Cracked Pistachio as desired on the page. Dry the page with a heat tool.

Step Two. From the Patterns 2 Stamp set, you’ll need the bubbles stamp. Apply Jet Black Archival Ink to the stamp and stamp randomly on the page as desired seven times. Reapply ink to the stamp as needed. Ink the edges of the page using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut a 1 7/8″ Diagonal Stitched Fishtail out of White Soft Finish Cardstock. Die cut another 1 7/8″ Diagonal Stitched Fishtail out of Misty Mauve Soft Finish Cardstock. Die cut a 3/4″ Diagonal Stitched Fishtail out of a piece of patterned paper. Tear a bit off the top of both 1 7/8″ fishtails. Distress the edges of all three fishtails. Ink the edges of the fishtails using Black Soot Distress Ink and a blending tool with foam.

Step Four. Die cut the 2 3/4″ and 1 1/2″ Note pieces out of book page from the Planner Essentials 21 – Note Pieces die. Distress the edges of the note pieces. Ink the edges of the note pieces using Black Soot Distress Ink and a blending tool with foam.

Step Five. Choose one of the small tag toppers from the Planner Essentials 26 – Planner Pocket 3 – Tag & Toppers out of White Soft Finish Cardstock. Distress the edges of the tag topper. Ink the edges of the tag topper using Black Soot Distress Ink and a blending tool with foam.

Step Six. Choose one of the labels from the Planner Labels. Die cut the label out of patterned paper. Distress the edges of the label. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Seven. From the Planner Essentials – 2 die, die cut the small tag out of patterned paper. Distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Die cut the tag from the Planner Essentials -4 die out of patterned paper. Distress the edges of the tag. Ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Step Nine. Die cut the diamond pattern from the Planner Patterns die out of black cardstock.

Step Ten. From the Planner Essentials 24 – Photo Frame Page die, die cut the film strip out of black cardstock.

Step Eleven. Die cut the heart from the Planner Essentials – 8 die out of White Soft Finish Cardstock. Distress the edges of the heart. Ink the edges of the heart using Black Soot Distress Ink and a blending tool with foam.

Step Twelve. From the Planner Essentials 20 – Half Heart Page Set die, die cut the plain lightbulb out of White Soft Finish Cardstock. Die cut the heart lightbulb out of Misty Mauve Soft Finish Cardstock. Distress the edges of the lightbulbs and heart. Ink the edges of the lightbulbs and heart using Black Soot Distress Ink and a blending tool with foam.

Step Thirteen. Choose on of the reinforcements from the Reinforcement Variety Pack. Die cut the reinforcement out of White Soft Finish Cardstock. You’ll need a total of six. Ink the edges of the reinforcements using Black Soot Distress Ink and a blending tool with foam.

Step Fourteen. From the Important Memo Stamp Set, you’ll need the You Will Never Know The Value quote. Apply Jet Black Archival Ink to the quote and stamp onto a piece of White Soft Finish Cardstock. Cut the quote into eleven strips. Ink the edges of the strips using Black Soot Distress Ink and a blending tool with foam.

Step Fifteen. Adhere the reinforcement pieces over top of the circles on the page.

Step Sixteen. Foam square the white 1 7/8″ fishtail 1 1/4″ from the right and 3/4″ from the top of the page. Adhere the other fishtail 1 5/8″ from the left and 1″ from the top of the page. Adhere the 2 3/4″ note piece 1 1/8″ from the left and 1 1/2″ from the top of the page.

Step Seventeen. Adhere the diamond pattern piece to the middle of the note piece. Adhere the 3/4″ fishtail 2 1/4″ from the left and 1 1/4″ from the top of the page. Adhere the tag topper 7/8″ from the right and 2″ from the top of the page.

Step Eighteen. Foam square the large tag 1 1/8″ from the right and 1 3/4″ from the top of the page. Adhere the small tag to the bottom of the large tag. Make sure the hole of the tag sits at the bottom of the large tag.

Step Nineteen. Staple the filmstrip 1/4″ from the left of the 1 1/2″ note piece at the top and bottom. Adhere the 1 1/2″ note piece 1 1/4″ from the left and 1 5/8″ from the bottom of the page. Adhere the white heart 1/2″ underneath of the left hand side of the label. Adhere the label 1 1/2″ from the right and 2 1/4″ from the top of the page.

Step Twenty. Adhere the heart lightbulb to the plain lightbulb. Staple the heart to the bottom right side of the heart lightbulb. Foam square the lightbulb 1 1/2″ from the right and 2 1/2″ from the top of the page.

Step Twenty One. Adhere the You Will Never Know quote to the right hand side of the lightbulb and heart as desired. To finish the page, add a staple in the bottom right of the large tag and top left of the large tag.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my You Will Never Know the Value Planner Page.

Katelyn

Elizabeth Craft Designs Supplies Used:

Other Supplies Used:

  • Distress Ink: Black Soot
  • Distress Spray Stain: Abandoned Coral, Cracked Pistachio and Mermaid Lagoon
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Prima Marketing: Patterned Paper
  • Misc: Black Cardstock, Kraft Cardstock, Book Page and Mini Stapler
Elizabeth Craft Designs General Joset Designs Planner Essentials

Step-By-Step: My September Week #3 Planner Spread

September 24, 2019

Hey Crafters! Katelyn here, sharing with you my September Week #3 planner spread for my planner.

To create this spread, I’ve used a variety of dies from the Planner Essentials collection and Joset Designs. I hope you enjoy my tutorial!

Step One. Choose some patterned paper (mine is from the Georgia Blues Collection). Die cut the page from the Planner Essentials – 4 page out of the paper. Die cut the page from the Planner Essentials – 2 page out of the paper. Apply Jet Black Archival Ink to the chicken wire stamp from the Background Stamp 1 and stamp randomly on each page. Reapply ink as needed. Apply Jet Black Archival Ink to the script stamp from the Background Stamp 2 and stamp randomly on each page. Reapply ink as needed. Apply Jet Black Archival Ink to the September month from the Months stamp set and stamp onto the tab on the left hand page. Distress the edges of each page. Ink the edges of each page using Black Soot Distress Ink and a blending tool with foam.

Step Two. Choose a patterned paper (mine is from the Spring Farmhouse collection). Die cut the reinforcement circles from the Planner Essentials – 1 die twice out of the patterned paper. Ink the edges of the 12 reinforcements circles using Black Soot Distress Ink and a blending tool with foam.

Step Three. Die cut seven labels from the Planner Labels die out of kraft cardstock. Apply Jet Black Archival Ink to the days of the week from the Schedule stamp set and stamp each one day of the week on each of the labels. Use a black pen to write in to-do’s on each label. Distress the edges of each label. Ink the edges of the label using Black Soot Distress Ink and a blending tool with foam.

Step Four. Choose another patterned paper (mine is from the Spring Farmhouse paper). From the Planner Essentials – 6 die, die cut two large rectangles out of the patterned paper. Distress the edges. Ink the edges of the rectangles using Black Soot Distress Ink and a blending tool with foam.

Step Five. From the Stitched Indented Rectangle die, die cut two 3″ rectangles out of the same patterned paper used for the reinforcement circles. Distress the edges. Ink the edges of the rectangles using Black Soot Distress Ink and a blending tool with foam.

Step Six. Choose another patterned paper (mine is from the Spring Farmhouse paper). From the Stitched Indented Rectangle die, die cut two 3 1/2″ rectangles out of the patterned paper. Distress the edges. Ink the edges of the rectangles using Black Soot Distress Ink and a blending tool with foam.

Step Seven. From the Diagonal Stitched Fishtails, die cut the 1 1/2″ fishtail twice out of kraft cardstock. Distress the edges of each fishtail. Ink the edges of each fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Eight. Choose another patterned paper (mine is from the Spring Farmhouse paper). From the Diagonal Stitched Fishtails, die cut the 1 7/8″ fishtail twice out of the patterned paper. Distress the edges of each fishtail. Ink the edges of each fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Nine. From the Diagonal Stitched Fishtails, die cut the 1 1/8″ fishtail twice out of the same patterned paper used for the large rectangles. Distress the edges of each fishtail. Ink the edges of each fishtail using Black Soot Distress Ink and a blending tool with foam.

Step Ten. Choose a flag from the Celebration Flags die. From the same patterned paper used for the 3″ stitched indented rectangle, die cut two of the flags out. Cut both flags down to 3 3/4″. From the same patterned paper used for the large rectangles, die cut two of the flags out. Cut one of the flags down to 4 1/4″ and cut the other flags down to 3 1/4″.

Step Eleven. Adhere six of the reinforcement circles to the left page. Adhere the other six reinforcement circles to the right page.

Step Twelve. Adhere the 1 1/8″ stitched fishtail to the 1 1/2″ stitched fishtail. Adhere the 1 1/2″ stitched fishtail to the 1 7/8″ stitched fishtail. Repeat for the other page. Foam square one of the stacked stitched fishtails to the left page 1 1/2″ from the left and 1″ from the bottom of the page. Foam square the other stacked stitched fishtails to the right page 1 1/4″ from the right and 1″ from the bottom of the page.

Step Thirteen. Adhere the 3″ stitched indented rectangle to the 3 1/2″ stitched indented rectangle. Adhere the large rectangle to the 3″ stitched indented rectangle. Repeat for the other page. Use adhesive and foam squares to adhere the stacked stitched indented rectangles to the left page 1/2″ from the left and 2″ from the bottom of the page. Use adhesive and foam squares to adhere the other stacked indented rectangles to the right page 1/2″ from the right and 2″ from the bottom of the page.

Step Fourteen. Adhere the Monday to Wednesday labels to the left hand page. Adhere the Thursday to Sunday labels to the right hand page.

Step Fifteen. In the top left corner of the left page, adhere the 3 3/4″ and 4 1/4″ flags. In the top right corner of the right page, adhere the 3 3/4″ and 3 1/4″ flags.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my September Week #3 planner spread.

Katelyn

Elizabeth Craft Designs Supplies:

Other:

  • Distress Ink: Black Soot
  • Blending Tool with Foam
  • Ranger Ink: Jet Black Archival Ink
  • Prima Marketing: Spring Farmhouse and Georgia Blues Collections
  • Misc: Black Journaling Pen and Kraft Cardstock

%d bloggers like this: