Browsing Tag

Kids Beacon Choice Glue

Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Happy Halloween Card

September 2, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Halloween Card which features a variety of the new Halloween dies from Joset Designs! I hope you enjoy my tutorial!

Step One. You’ll need two patterned papers from the An Eerie Tale patterned paper. Die cut the 4 3/4″ Stitched Rounded Square out of one of the patterned papers. Die cut the 5 1/4″ Stitched Rounded Square out of the other patterned paper. Distress the edges of the squares. Ink the edges of the squares using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut the Happy Halloween from the Words 3 – Happy Holiday die out of White Soft Finish Cardstock. Using a blending tool with foam, blend Carved Pumpkin Distress Ink over the entire surface of each word.

Step Three. From the Spider Web die, die cut the spider web out of Black Soft Finish Cardstock. Cut the spider web in half.

Step Four. From the Halloween Accessories die, die cut two bats out of Black Soft Finish Cardstock.

Step Five. Die cut the Haunted House and Cat from the Haunted House Set out of Black Soft Finish Cardstock.

Step Six. Die cut the Iron Fence out of White Soft Finish Cardstock. Using a blending tool with foam, blend Hickory Smoke and Black Soot Distress Ink over the entire surface of the iron fence.

Step Seven. Die cut the medium sized pumpkin and stem from the Pumpkins die out of White Soft Finish Cardstock. Using a blending tool with foam, blend Carved Pumpkin Distress Ink over the entire surface of the pumpkin. Using a blending tool with foam, blend Peeled Paint Distress Ink over the entire surface of the stem.

Step Eight. From the Scarecrow die, die cut the small pumpkin and the stem. Die cut the two of each of the vines as well as two of each of the leaves from the Pumpkin die out of White Soft Finish Cardstock. Using a blending tool with foam, blend Carved Pumpkin Distress Ink over the entire surface of the pumpkin. Using a blending tool with foam, blend Peeled Paint Distress Ink over the entire surface of the stem, all four leaves and all four vines.

Step Nine. Adhere one half of the spider web to the bottom right portion of the 5 1/4″ patterned paper square. Adhere the other half of the spider web to the top portion of the 5 1/4″ patterned paper square. Adhere the 4 3/4″ square to the 5 1/4″ square.

Step Ten. Adhere the Iron Fence to the bottom portion of the 4 3/4″ square. Use foam squares to adhere the haunted house to the left hand side of the 4 3/4″ square. Use foam squares the adhere the two bats to the right of the haunted house.

Step Eleven. Adhere the stems to each pumpkin. Use foam squares to adhere the larger pumpkin 1/2″ from the bottom and 1 7/8″ from the left of the 4 3/4″ square. Adhere the other pumpkin 1/8″ from the bottom and 1 5/8″ from the left of the 5 1/4″ square. Adhere the leaves and vines as desired around the pumpkins.

Step Twelve. Adhere the Happy Halloween sentiment to the top right corner of the 4 3/4″ square.

Step Thirteen. Cut a cardbase out of White Soft Finish Cardstock that measures 5 1/4″ x 10 1/2″, score at 5 1/4″. Adhere the cardfront to the cardbase.

Thank you for joining me today! I hope that I’ve inspired you to create your own version of my Happy Halloween Card.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1559654439292

Other:

  • Distress Ink: Black Soot, Carved Pumpkin, Peeled Paint and Hickory Smoke
  • Blending Tool with Foam
  • Graphic 45: An Eerie Tale – You Bewitch Me and Enchantment
Elizabeth Craft Designs General Joset Designs ModaScrap Soft Finish Cardstock

How To Create This Happy Spring Card

April 24, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Spring Card. Spring is definitely here on the west coast of Canada and has been providing a ton of inspiration for my projects these days.

To create this card, I’ve used dies and patterned paper from ModaScrap as well as a stamp set from Joset Designs. I hope that you enjoy my tutorial!

Step 1. From the Blue Cotton Candy Paper Pack, you’ll need the white flower kraft patterned paper. Die cut the 4″ Dashing Rectangle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 2. Die cut the 3 1/2″ Dashing Rectangle out of the White Soft Finish Cardstock. Sprinkle Aquamarine and Jade Magenta Nuance lightly in the middle of the rectangle piece. Spritz the powder with water. Once the paper has dried, ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 3. Die cut the 2 1/4″ Dashing Circle out of White Soft Finish Cardstock. Apply Cottage Ivy Memento Ink to the branch stamp from the Wedding Sentiments stamp set and start stamping in the circle. Reapply ink the branch as many time as needed to complete a circle of branches.

Step 4. Apply Onyx Black Versafine Ink to the Happy Spring stamp from the Spring Sentiments stamp set and stamp in the center of the circle. Add a Transp.Glitter/Gold Dot in between each stamped branch in the circle. Ink the edges of the circle using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 5. From the Wood Effect Paper Pack, you’ll need to choose one of the wood patterned papers. Die cut the 2 3/4″ Dashing Circle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 6. Die cut the Lace card out of White Soft Finish Cardstock. Cut the Lace card down to 4″.

Step 7. Die cut the three Dragonflies out of White Soft Finish Cardstock. Lightly sprinkle Jade and Aquamarine Magenta Nuance powder overtop of the dragonflies. Spritz the powder with water.

Step 8. Adhere the 3 1/2″ Dashing Rectangle piece to the 4″ Dashing Rectangle piece. Adhere the lace card element to the left hand side of the 4″ Dashing Rectangle.

Step 9. Adhere the Happy Spring circle to the wood circle. Foam square the wood circle 1 1/8″ from the left and 3/4″ from the top of the 4″ Dashing Rectangle.

Step 10. Adhere the dragonflies as desired around the Happy Spring circle. To finish off the card, cut a cardbase out of White Soft Finish Cardstock that measures 4″ x 10 1/2″, score at 5 1/4″. Adhere the card front to the card base.

Thanks for joining me today. I hope that I’ve inspired you to create your own version of my Happy Spring Card.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1552642647875

Other:

  • Magenta Nuance: Jade and Aquamarine
  • Distress Oxide Ink: Black Soot
  • Blending Tool with Foam
  • Versafine: Onyx Black
  • Memento Ink: Cottage Ivy
Els van de Burgt Studio Joset Designs ModaScrap Soft Finish Cardstock Susan's Garden Club

JOY Christmas Card

November 6, 2018

Hey Crafters! Katelyn here, sharing with you my JOY Christmas Card. The inspiration came from Susan’s Garden Notes Berry Spray and Frosty Fern dies. With those elements figured out, I added more with dies from ModaScrap, Els van de Burgt Studio and Joset Designs to finish it off. I hope that you enjoy my tutorial!

Continue Reading

Elizabeth Craft Designs General Joset Designs ModaScrap

Cheers Notecard

June 14, 2018

 

Hey Crafters! Katelyn here, sharing with you my Cheers Notecard. Summer is right around the corner and with it comes summer parties, so why not have a cute notecard on hand to add to that hostess gift. Using a variety of dies from ModaScrap and Joset Designs I was able to create this fun Cheers Card. I hope you enjoy my tutorial!

Continue Reading

Elizabeth Craft Designs General Els van de Burgt Studio Joset Designs ModaScrap Soft Finish Cardstock

Tropical Hello Tag

June 7, 2018

 

Hey Crafters! Katelyn here, sharing with you my Tropical Hello Tag. With summer right around the corner, I was inspired to create something tropical. Using a variety of dies from Els van de Burgt Studio and Joset Designs to create this fabulous Tropical Hello Tag. I hope you enjoy my tutorial!

Continue Reading

%d bloggers like this: