Halloween Accessories

Elizabeth Craft Designs General Joset Designs

Sweet ‘n Scary Interactive Mini Slimline Card

August 22, 2022

Hi everyone, it’s Tina here. Yes you are seeing Halloween items in the stores. No it’s not your imagination. However the Monster Release came just in time for Halloween. I used the Monster 2, Halloween Accessories along with the Pull Tab dies to create my Interactive Sweet ‘n Scary Card. Below you will find the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 7″ x 6″, score at 3 1/2″ and fold in half for a vertical side fold card. (Mini Slimline)

Step 2 – Diecut Slimline Adventure Edges (clouds) using White Cardstock to use as a stencil. Trim White Soft Finish Cardstock to 3 1/2″ x 6″. Place the diecut on the cardstock and using a Blending Brush apply ink of your choice. Repeat this step until you reach the bottom of the cardstock. I used Distress Oxide Villainous Potion.

Step 3 – Diecut Pull Tab using White Cardstock except for the rectangular hole piece, you will need to diecut that piece using the panel created in Step 2. Follow the score lines and assemble the pieces. Once everything is assembled adhere the panel to the card front using 3mm Double Sided Adhesive Tape.

Step 4 – Diecut Monster 2 using White Soft Finish Cardstock (ink the cardstock using orange ink. I used Distress Oxide Spiced Marmalade – except for teeth and eyes). For shading I used Distress Oxide Ripe Persimmon and Candied Apple for the warts. Assemble and adhere to the 2 tabs sticking out using Kid’s Choice Glue.

Step 5 – Diecut Party Accessories using coloured Cardstock (purple for hat, yellow for buckle, black for strip and bats, brown for broom stick). Assemble and adhere to card using Kid’s Choice Glue.

Step 6 – Diecut Slimlime Adventure Edges (grass) using Green Cardstock. Stamp Monster Hugs sentiment using Versafine Onyx Black Ink. Adhere to card using Foam Tape.

All the products used are linked below. Thank you for stopping by and Happy Crafting!

Product Used:

1 Comment

Cardmaking Inspiration from the Design Team Joset Designs Soft Finish Cardstock

Hocus Pocus

October 15, 2019

Hi Friends! It’s EK popping in to create a little Halloween Fun. My family’s favorite Halloween movie is Hocus Pocus, and it occurred to me, that I could make my own bit of witchy fun using the Halloween Accessories and some creative coloring.

Step One: Die cut all the pieces you need from some 90lb Soft Finish Cardstock using both the Halloween Accessories die set and the Spider Web die set.

Step Two: Color up the accessories and assemble using Kids Choice Glue. I used a combination of cool grays for the cauldron (C5, C7, C9). I used E31, E34, and E37 for the bristles on the broom stick, while I used E81, E84, and E87 for the handle and spoon. I used G02, G05, and G09 for the bubbles and sludge.

Step Three: Color up the Witch’s Hats and assemble with Kid’s Choice Glue. I themed each of the hats after each of the three witches from Hocus Pocus. I colored a blonde hat (Y000, Y00, Y02 and Y06) to represent Sarah, a gray hat (W5, W7, W9) to represent Mary, and a reddish hat (E13, E07, E09, E19) to represent Winifred.

Step Four: Cut a piece of Bonnie Blue Soft Finish Cardstock to 12×6 inches and score and fold to make a 6×6 card base. Then spray and splatter the card frame with some Distress Oxide Spray. I used Mermaid Lagoon.

Step Five: Die cut out the movie title’s letters using the Blackboard Alphabet letters from some Spring Green Soft Finish Cardstock.

Step Six: Using a copic maker, give the title a little shading. I used both a YG13 and N2 copic.

Step Seven: Trim the spider web into half and adhere it to the corners of the card frame with some Kids Choice Glue.

Step Eight: Using both Kids Choice Glue and 6mm Clear Double Sided Adhesive, adhere the rest of the pieces of the card to the card frame.

I just love how this card came out and can’t wait to send it to my best friend who loves this move even more than I do. I think without stealing any intellectual rights, I was about to absolutely capture the feel of the movie.

Let me know in the comments below if I put a spell on you! Until then, Happy Crafting.

https://linkdeli.com/widget.js?1559654439292

Elizabeth Craft Designs General Joset Designs Soft Finish Cardstock

Happy Halloween Card

September 2, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Halloween Card which features a variety of the new Halloween dies from Joset Designs! I hope you enjoy my tutorial!

Step One. You’ll need two patterned papers from the An Eerie Tale patterned paper. Die cut the 4 3/4″ Stitched Rounded Square out of one of the patterned papers. Die cut the 5 1/4″ Stitched Rounded Square out of the other patterned paper. Distress the edges of the squares. Ink the edges of the squares using Black Soot Distress Ink and a blending tool with foam.

Step Two. Die cut the Happy Halloween from the Words 3 – Happy Holiday die out of White Soft Finish Cardstock. Using a blending tool with foam, blend Carved Pumpkin Distress Ink over the entire surface of each word.

Step Three. From the Spider Web die, die cut the spider web out of Black Soft Finish Cardstock. Cut the spider web in half.

Step Four. From the Halloween Accessories die, die cut two bats out of Black Soft Finish Cardstock.

Step Five. Die cut the Haunted House and Cat from the Haunted House Set out of Black Soft Finish Cardstock.

Step Six. Die cut the Iron Fence out of White Soft Finish Cardstock. Using a blending tool with foam, blend Hickory Smoke and Black Soot Distress Ink over the entire surface of the iron fence.

Step Seven. Die cut the medium sized pumpkin and stem from the Pumpkins die out of White Soft Finish Cardstock. Using a blending tool with foam, blend Carved Pumpkin Distress Ink over the entire surface of the pumpkin. Using a blending tool with foam, blend Peeled Paint Distress Ink over the entire surface of the stem.

Step Eight. From the Scarecrow die, die cut the small pumpkin and the stem. Die cut the two of each of the vines as well as two of each of the leaves from the Pumpkin die out of White Soft Finish Cardstock. Using a blending tool with foam, blend Carved Pumpkin Distress Ink over the entire surface of the pumpkin. Using a blending tool with foam, blend Peeled Paint Distress Ink over the entire surface of the stem, all four leaves and all four vines.

Step Nine. Adhere one half of the spider web to the bottom right portion of the 5 1/4″ patterned paper square. Adhere the other half of the spider web to the top portion of the 5 1/4″ patterned paper square. Adhere the 4 3/4″ square to the 5 1/4″ square.

Step Ten. Adhere the Iron Fence to the bottom portion of the 4 3/4″ square. Use foam squares to adhere the haunted house to the left hand side of the 4 3/4″ square. Use foam squares the adhere the two bats to the right of the haunted house.

Step Eleven. Adhere the stems to each pumpkin. Use foam squares to adhere the larger pumpkin 1/2″ from the bottom and 1 7/8″ from the left of the 4 3/4″ square. Adhere the other pumpkin 1/8″ from the bottom and 1 5/8″ from the left of the 5 1/4″ square. Adhere the leaves and vines as desired around the pumpkins.

Step Twelve. Adhere the Happy Halloween sentiment to the top right corner of the 4 3/4″ square.

Step Thirteen. Cut a cardbase out of White Soft Finish Cardstock that measures 5 1/4″ x 10 1/2″, score at 5 1/4″. Adhere the cardfront to the cardbase.