Browsing Tag

Dashing Rectangles

Cardmaking Elizabeth Craft Designs General Inspiration from the Design Team ModaScrap Soft Finish Cardstock

Quick Holiday Crafts

November 5, 2019

Hey everyone! It’s EK and I have a quick Christmas craft to share with you to help launch your holiday season. The holidays might be ‘the happiest time of the year’, but lets be real, they can also be the most stressful. So any time I can find something that is a true quick craft that is also super cute, I take full advantage of it.

Step One: Trim three pieces of paper from ModaScrap’s It’s Christmas Time paper pack to 6×12 inches. Die cut each piece of paper with the ModaScrap Triangle Box.

Step Two: Using the pre-scored lines the die left, gently fold the triangle box.

Step Three: Using some 6mm Clear Double Sided Adhesive, add tape to the edges of the box.

Step Four: Assemble the box.

Step Five: Using a piece of string, tape it inside the box so you can tie close the box.

These boxes are super simple to assemble, but a perfect way to give the holiday gift of cash, and plus they are the perfect vessel for little chocolate kisses.

Step Six: With the left over printed paper, die cut a rectangle and circle from the papers using the Dashing Rectangles and Dashing Circles die sets.

Step Seven: Trim up some left over Rust Soft Finish Cardstock and adhere is to the back of the circles to create little ornaments.

Step Eight: Adhere some string to the back of the ornament.

Step Nine: Adhere the die cut rectangle and circles to an A2 card frame made from some 90lb Soft Finish Cardstock.

Step Ten: Die cut a sentiment from some Forest Green Soft Finish Cardstock that has a sheet of Clear Double Sided Adhesive attached to the back from the Words 5- Winter Wishes die set. Attach the sentiment to the card frame.

Seriously, this box and card set could not be easier to create. They are super cute, but will save you time during your holiday season.

EK


https://linkdeli.com/widget.js?1559654439292

ModaScrap Soft Finish Cardstock

Mr & Mrs Card

July 24, 2019

Hey Crafters! Katelyn here, sharing with you a pretty wedding card perfect to give to that special couple getting married this year.

To create my card, I’ve used a variety of dies and patterned paper from ModaScrap. I hope you enjoy my tutorial!

Step one. Choose a piece of patterned paper from the ModaScrap Pink Cotton Candy Paper Pack. Die cut the 4″ Dashing Rectangle out of the patterned paper piece. Die cut the 4 1/2″ Dashing Rectangle out of the kraft cardstock piece. Ink the edges of both pieces with Ground Espresso Distress Ink and a blending tool with foam.

Step two. Die cut the Lace Corner twice out of White Soft Finish Cardstock. Die cut the Lace Corner twice out of kraft cardstock. Ink the edges of all four corners using Ground Espresso Distress Ink and a blending tool with foam.

Step three. Die cut the 2 3/4″ Dashing Circle out of kraft cardstock. From the Wedding Sentiments stamp set, you’ll need the connected hearts stamp. Apply VersaMark Ink to the heart stamp and stamp onto the circle. Reapply ink to the stamp and stamp again until the entire circle is covered. Ink the edges of the circle using Ground Espresso Distress Ink and a blending tool with foam.

Step four. Apply Jet Black Archival Ink to the Mr & Mrs stamp and stamp onto a piece of White Soft Finish Cardstock. Fussy cut the Mr & Mrs out.

Step five. Choose another patterned paper piece out of Pink Cotton Candy Paper Pack. Die cut one of the hearts from the True Love die set out of the patterned paper. Ink the edges of the heart using Ground Espresso Distress Ink and a blending tool with foam.

Step six. Choose a third piece of patterned paper from the Pink Cotton Candy Paper Pack. Die cut the hearts from the Love, Life Tag out of the patterned paper three times. Ink the edges of the three hearts using Ground Espresso Distress Ink and a blending tool with foam.

Step seven. Adhere the 4″ Dashing Rectangle to the 4 1/2″ Dashing Rectangle.

Step eight. Adhere the white lace corner to the kraft lace corner, making sure a bit of the kraft lace corner is showing. Repeat the previous step for the other corner. Adhere one of the lace corners to the bottom right side of the rectangles. Adhere the other lace corner to the top left side of the rectangles.

Step nine. Foam square the dashing circle to the middle of the cardfront. Foam square the heart to the middle of the circle.

Step ten. Adhere the Mr & Mrs sentiment to the middle of the heart. Adhere the three hearts around the large heart. Cut a piece out of White Soft Finish Cardstock that measures 5 3/4″ x 9″, score at 4 1/2″. Adhere the cardfront to the cardbase.

Thanks for joining me today! I hope that I’ve inspired you to create your own version of my Mr & Mrs Card.

Katelyn

Elizabeth Craft Designs Supplies:

Other:

  • Distress Ink: Ground Espresso
  • Blending Tool with Foam
  • Ranger Ink: Emboss It Dabber and Jet Black Archival Ink
  • Misc: Kraft Cardstock
Elizabeth Craft Designs General Joset Designs Stamping

Have A Magical Day Card

July 10, 2019

Hi everyone, it’s Tina here. Today’s card features the super adorable Parrot Die from Joset Designs. I used Alcohol Markers to color him to add shading and dimension. Below you will find the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″ and fold in half for a vertical side fold card. (A2 size)

Step 2 – Diecut Garden Notes Frame-It Stitched Rectangles and Dashing Rectangles using Patterned Paper to create a Pop-Up Frame. Trim Solid Patterned Paper a little larger than the diecut Frame created (about 3 1/4″ x 4 1/2″). Adhere the trimmed Patterned Paper to the front of the card using 3mm Clear Double Sided Adhesive Tape. Adhere the Frame using Foam Tape.

Step 3 – Diecut Parrot using White Soft Finish Cardstock. Color in each piece using Alcohol Markers. I used Tri-Blends. (or you can diecut using colored cardstock) Assemble the parrot using Kid’s Choice Glue. Adhere to card using Foam Tape.

Step 4 – Stamp Build Your Own Sentiment (I used Have A Magical Day) using Versamark Ink on the same Patterned Paper that I used for inside my frame. Sprinkle some Black Embossing Powder and remove the excess. Heat set it with a Heat Tool. Diecut Stitched Fishtail Banners using the sentiment created. After you pass it in the die take out the diecut and turn it around and diecut again. This will create a fishtail on both ends. Adhere to card using Foam Tape.

Step 5 – Optional – For added interest and sparkle adhere clear gems randomly to the front of card.

This card can be used for lots of occasions by changing the patterned paper, colors and sentiment. Below is a link to all the products used. Have a wonderful day and see you again soon.

Tina

Products Used:

Krista Schneider Soft Finish Cardstock Stamping

How To Use Sentiments To Create A Background

June 6, 2019

Hi Everyone, it’s Tina here. I have a sweet and simple card to share with you using sentiments to create a background. I used the Garden Party Clear Stamps from Krista Schneider. Below you will find the steps to create your own card.

Step 1 – Trim White Soft Finish Cardstock to 8 1/2″ x 5 1/2″, score at 4 1/4″ and fold in half for a vertical side fold card. (A2)

Step 2 – Trim Soft Finish Café au Lait to 4 1/4″ x 5 1/2″. Stamp Garden Party sentiments (Bloom, Blossom, Grow) using a soft brown Ink. You could mix it up but I decided on the sentiments repeating on each row. Diecut Garden Notes Frame It Stitched Squares. Save the inner square. Diecut Dashing Rectangles and adhere to card using 3mm Clear Double Sided Adhesive Tape.

Step 3 – Stamp Garden Party image onto White Soft Finish Cardstock using Gina K Amalgam Ink. This is an alcohol friendly ink. Color in the image using alcohol markers. I used Tri-Blend Markers by Spectrum Noir. Diecut the image with the matching die.

Step 4 – Diecut Dotted Scallop Squares using White Soft Finish Cardstock. Adhere the center square from Step 2 on top of the Dotted Scallop Square diecut and then the diecut image using 3mm Clear Double Sided Adhesive Tape. Optional – Wrap some twine around the bottom 3 times and tie a bow. Adhere to card using foam tape.

This card can be used for any occasion. Below is a link to all the products used. Thank you for stopping by and have a wonderful day!

Tina

Products Used:
Elizabeth Craft Designs General Joset Designs ModaScrap Soft Finish Cardstock

How To Create This Happy Spring Card

April 24, 2019

Hey Crafters! Katelyn here, sharing with you my Happy Spring Card. Spring is definitely here on the west coast of Canada and has been providing a ton of inspiration for my projects these days.

To create this card, I’ve used dies and patterned paper from ModaScrap as well as a stamp set from Joset Designs. I hope that you enjoy my tutorial!

Step 1. From the Blue Cotton Candy Paper Pack, you’ll need the white flower kraft patterned paper. Die cut the 4″ Dashing Rectangle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 2. Die cut the 3 1/2″ Dashing Rectangle out of the White Soft Finish Cardstock. Sprinkle Aquamarine and Jade Magenta Nuance lightly in the middle of the rectangle piece. Spritz the powder with water. Once the paper has dried, ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 3. Die cut the 2 1/4″ Dashing Circle out of White Soft Finish Cardstock. Apply Cottage Ivy Memento Ink to the branch stamp from the Wedding Sentiments stamp set and start stamping in the circle. Reapply ink the branch as many time as needed to complete a circle of branches.

Step 4. Apply Onyx Black Versafine Ink to the Happy Spring stamp from the Spring Sentiments stamp set and stamp in the center of the circle. Add a Transp.Glitter/Gold Dot in between each stamped branch in the circle. Ink the edges of the circle using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 5. From the Wood Effect Paper Pack, you’ll need to choose one of the wood patterned papers. Die cut the 2 3/4″ Dashing Circle out of the patterned paper piece. Ink the edges of the paper using Black Soot Distress Oxide Ink and a blending tool with foam.

Step 6. Die cut the Lace card out of White Soft Finish Cardstock. Cut the Lace card down to 4″.

Step 7. Die cut the three Dragonflies out of White Soft Finish Cardstock. Lightly sprinkle Jade and Aquamarine Magenta Nuance powder overtop of the dragonflies. Spritz the powder with water.

Step 8. Adhere the 3 1/2″ Dashing Rectangle piece to the 4″ Dashing Rectangle piece. Adhere the lace card element to the left hand side of the 4″ Dashing Rectangle.

Step 9. Adhere the Happy Spring circle to the wood circle. Foam square the wood circle 1 1/8″ from the left and 3/4″ from the top of the 4″ Dashing Rectangle.

Step 10. Adhere the dragonflies as desired around the Happy Spring circle. To finish off the card, cut a cardbase out of White Soft Finish Cardstock that measures 4″ x 10 1/2″, score at 5 1/4″. Adhere the card front to the card base.

Thanks for joining me today. I hope that I’ve inspired you to create your own version of my Happy Spring Card.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1552642647875

Other:

  • Magenta Nuance: Jade and Aquamarine
  • Distress Oxide Ink: Black Soot
  • Blending Tool with Foam
  • Versafine: Onyx Black
  • Memento Ink: Cottage Ivy
Joset Designs

How To Create This Happy Easter Chick

March 24, 2019

Hi there,

It’s Tanja here, sharing the step-by-step tutorial for this sweet Easter card. Joset’s new collection contains three new Easter/Spring die sets, including the Little Chick that is featured in this project!

Step 1: Die Cutting

  • Cut out chick and some eggs from white Soft Finish Cardstock with the help of the Little Chick die set

Step 2: Coloring

  • Color the parts with Alcohol Markers
  • Add shading and speckles with Distress Inks (I used Wild Honey, Dusty Concord, Hickory Smoke, Picked Raspberry, Peacock Feathers, Broken China) and highlights with a white gel pen
  • Assemble the chick

Step 3: Create the Background

  • Cut out a background panel using one of the Dashing Rectangles dies
  • Cut another rectangle from green cardstock and turn it into a grass border using the Adventure Edges die set
  • Add some clouds with the help of the Cloud and Grass Stencil, Distress Ink Tumbled Glass and a Mini Ink Blending Tool

Step 4: Final Steps

  • Stamp the sentiment from the Spring Sentiments Stamp Set with Versafine Smokey Gray
  • Adhere all the elements to the card panel
  • Mount the panel onto a kraft cardbase

I hope this project inspired you to create your own!

Have a wonderful day.

Hugs,

Supply List:

Other
Distress Ink (Wild Honey, Dusty Concord, Hickory Smoke, Picked Raspberry, Peacock Feathers, Broken China, Tumbled Glass)
Mini Ink Blending Tool
green cardstock
Versafine Smokey Gray
kraft cardstock

Inspiration from the Design Team Krista Schneider Shimmer Sheetz Soft Finish Cardstock Stamping Uncategorized

I Melt for Cocoa

February 7, 2019

Since we are in full swing of winter, that means in my house we are in full swing of cocoa consumption. It seems every other day new snow is falling and tired kiddos need a little post school pick me up of sweet hot chocolate. So today, I thought I would whip up a little zero calorie treat that fits the seasons of warming up in the form of a mug of cocoa and a melting marshmallow.

Step One: Stamp the focal images from the Marshmallow Snowmen stamp set onto some 85lb White Soft Finish Cardstock. Color the images in with alcohol markers. I used my copics.

Step Two: Die cute the images using the coordinating Marshmallow Snowmen die set.

Step Three: Using the Dashing Circles die set, die cut a ring from a piece of Dusky Sky Soft Finish Cardstock to create the rim of the mug. Die cut a circle that will fit inside the mug rim from a piece of Bronze Metallic Shimmer Sheetz to be the cocoa.

Step Four: Using a piece of polka dot printed paper from the Sweet Vintage Rose collection, die cut it with the Dashing Rectangle die set.

Step Five: To create the handle of the mug, die cut an ‘O’ from some Dusky Sky Soft Finish Cardstock. Discard the ‘O’, and use the negative scrap from the inside of the letter. It sounds funny, but works perfectly.

Step Six: Using 10mm Clear Double Sided Adhesive, adhere the printed paper and mug/cocoa onto an A2 card frame.

Step Seven: Using some 3mm Clear Double Sided Adhesive, add the mug handle.

Step Eight: Add a bit of 3mm Clear Double Sided Adhesive to the bottom of the melting marshmallow. Add some three-dimensional squares to the top of the image. Adhere it to the shimmer sheetz circle. Adhere the stamped banner above the mug.

Step Nine: Stamp in brown ink, the sentiment from the Cute Winter Sentiments onto some 85lb White Soft Finish Cardstock. Trim the sentiment and matte it with some Rust Soft Finish Cardstock. Adhere it to the bottom left of the A2 card.

Step Ten: Using the same brown ink that you used to stamp the sentiment distress the edges of the A2 card frame.

What you get in the end is a fun mug of cocoa that is sure to brighten any child or chocolate-lover’s day.

Thanks for peeking in, and I hope you are staying warm.

EK Gorman


https://linkdeli.com/widget.js?1548928331426

Elizabeth Craft Designs General Joset Designs ModaScrap Uncategorized

Love Valentine’s Day Card

January 15, 2019

Hey Crafters! Katelyn here, sharing with you my Love Valentine’s Day Card. Valentine’s Day is right around the corner and it’s time to start thinking about creating cards for the occasion. The inspiration for my card came from ModaScrap’s True Love Die. With that element figured out, I added more to the card with die from Joset Designs to finish it off. I hope that you enjoy my tutorial!

Step 1. Die cut the heart edge from the Valentine’s Edges out of White Soft Finish Cardstock.

Step 2. Choose a piece of patterned paper –– the ModaScrap Simply Love Patterned Paper Pack is perfect for this project. Die cut the 3 1/2″ Dashing Rectangle from the patterned paper piece. Ink the edges of the rectangle using Black Soot Distress Ink and a Blending Tool with Foam.

Step 3. Die cut a 3 1/2″ Dashing Rectangle out of White Soft Finish Cardstock. Place a stencil with “x’s” overtop of the die cut piece. Sprinkle Red, Rosebud and Hot Pink Magenta Nuance overtop of the stencil and spritz with water, remove the stencil. Allow the rectangle to dry.

Step 4. Place the 3″ Dashing Rectangle overtop of the stenciled rectangle piece and run through your die cutting machine. You’ll end up with the piece shown above step 3 and the piece shown below step 3. Ink the edges of both pieces using Black Soot Distress Ink and a blending tool with foam.

Step 5. From the True Love Die, you’ll need the small to large hearts. Die cut the hearts out of White Soft Finish Cardstock. Sprinkle Hot Pink Magenta Nuance overtop of the Love heart, sprinkle Rosebud Magenta Nuance overtop of the small heart and sprinkle Red Magenta Nuance overtop of the medium heart. Spritz all three hearts with water. Once the hearts are dry, ink the edges using Black Soot Distress Ink and a Blending tool with foam.

Step 6. Adhere the heart edge to the 3 1/2″ patterned paper rectangle.

Step 7. Adhere the 3 1/2″ stenciled rectangle on an angle overtop of the 3 1/2″ patterned paper rectangle. Foam square the 3″ rectangle to the middle of the 3 1/2″ patterned paper rectangle.

Step 8. Foam square the hearts in a row in the middle of the 3″ stenciled rectangle piece.

Step 9. Cut a cardbase out of White Soft Finish Cardstock that measures 5″ x 8″, score at 4″. Adhere the cardfront to the cardbase.

Thanks for joining me today. I hope that I’ve inspired you to create your own version of my Love Valentine’s Day Card.

Katelyn

Elizabeth Craft Designs Supplies:

https://linkdeli.com/widget.js?1543923411530

Other Supplies Used:

– Distress Ink in Black Soot Distress Oxide Ink

– Blending Tool with Foam

– Magenta Nuance in Red, Rosebud and Hot Pink

– Stitched Layering Stencil

Joset Designs

Snowflake Thanks

December 28, 2018

It’s Karen here.  I hope everyone had a fun and happy holiday.  It’s a great time to create some fun cards to say “thanks” to our loved ones for coming to visit, for gifts we may have received, and lots of other reasons.  I’m providing some inspiration today using the Snowflakes dies and some Silk Microfine Glitter.

Continue Reading
Els van de Burgt Studio Joset Designs ModaScrap Soft Finish Cardstock Susan's Garden Club

JOY Christmas Card

November 6, 2018

Hey Crafters! Katelyn here, sharing with you my JOY Christmas Card. The inspiration came from Susan’s Garden Notes Berry Spray and Frosty Fern dies. With those elements figured out, I added more with dies from ModaScrap, Els van de Burgt Studio and Joset Designs to finish it off. I hope that you enjoy my tutorial!

Continue Reading

%d bloggers like this: