Pop it Ups Wednesday With

Pop it Ups Wednesday with Frances – Pull Card Edges

December 21, 2016

pulledgeallwm

Hi everyone,

It’s Frances here, and it is my turn to post a Pop it Ups Wednesday tutorial today. 

For my tutorial I have been playing with the Pull Card Edges die set. This die set was designed to use with all the Pull Card die sets to help with layering, but this die set can be used to create other cards as well, as you can see by the photo above. For my cards I have used all the edges in the set and you can see how you can use both the positive and negative parts when you die cut. Of course where I have used one shape on a card you can substitute one of the other shapes for a completely different look.

Card 1 – Oval Pull Card Edge with Lucky the Rabbit

pulledgerabbitwm

1. Cut a white base card that measures 4 1/4 inches x 11 inches. Score and fold along the 11 inch side to create a 4 1/4 inch x 5 1/2 inch top folding card.

pullcardrabbit3wm

2. Cut a piece of designer paper that measures approximately 6 inches square.

  • Position the Oval Pull Card Edge so it is in the centre of the designer paper and die cut.
  • Cut a piece of black paper approximately 6 inches square. Position the Oval Pull Card Edge in the centre of the card and die cut. Refer to top photo of photos above.
  • Cut a two pieces of black card 2 inches x 6 inches.
  • Apply glue to the edge of the under side of the designer paper and position the black card under the designer paper so a thin border of black is showing. (bottom photo above)

 3. Add the panel which has the oval bump to the left side of the front of the white card.

4. Die Cut Lucky the Rabbit and assemble and attach over the oval part of the card using foam tape.

5. Using black ink stamp “It’s Somebunny’s Birthday” from the Lucky Birthday Clear Stamp Set to the bottom of the design paper panel.

pullcardrabbit2wm

6. Inside of Card:

  • Adhere the designer paper that has the oval removed from the panel to the inside of the card. 
  • Using black ink, stamp the sentiment, carrot and rabbit from the Lucky Birthday Clear Stamp set onto card as per photo above. 

Card 2 – Rectangle Pull Card Edge with Coffee Cups

pulledgecoffee3wm

1.  Cut a piece of teal cardstock that measures 5 1/2 inches x 11 inches. Score and fold along the 11 inch side to create a 5 1/2 inch square top folding card.

  • Cut a piece of designer paper that measures 5 1/2 inch square and adhere to the front of the card.

pulledgecoffee5wm

 

  • Position the Rectangle Pull Card edge to the bottom edge of the card and tape in place. Run through die cutting machine and remove excess card.
  • Trim the back card edge so it is level with the bottom edge on the front of the card.
2.  Using the cup from the Cup Pop Stand die set, die cut 3 cups with cardstock, 2 cups from teal designer paper and 1 cup from brown designer paper (Tip: for the brown cup you will need to die cut the paper so that the die is on the back of the paper not the front so you have the handle going in the opposite position.
  • Die cut the scallop edge from brown and teal cardstock and adhere the scallop edge to the top rim of each cup.
  • Stack the cups together to make a tall stack and adhere to the front of the card using foam tape.
3. Die cut the spoon from the Cup Pop Stand die set from white card and Silver Metallic Shimmer Sheetz which has double sided adhesive tape on the back. Adhere the spoons together and attach to the front of the bottom cup. (Reminder: Review Els van de Burgt’s YouTube video if you are new to die cutting Shimmer Sheetz. It requires a metal adaptor plate or the Sizzix Big Shot with Precision Base Plate.)
4. Cut a strip of teal card 5 1/2 inches x 1 inch and adhere to the back of the card front so you have a small border showing from the edge.
pulledgecoffee4wm

5. Inside of Card – 

  • Cut a piece of brown designer paper that measures 5 1/2 inches x 2 inches and adhere to the bottom edge of the inside of card. 
  • Round both bottom corners.
6. From the Circles & Labels die set, die cut the middle label from white cardstock and the largest label from brown cardstock. Layer the labels together. 
  • Using the Coffee & Tea Clear Stamp set, stamp the three sentiments onto the white label so they are staggered.
  • From the Cup Pop Stand Card die cut 3 coffee beans from brown cardstock and adhere to the white label.

Card 3 – Circle Pull Card Edge with Whiskers the Cat

pulledgecat1wm

1. Cut a piece of white cardstock that measures 4 1/2 inches x 11 inches. Score and fold to create a top folding card that measures 4 1/2 inches x 5 1/2 inches.

  • Cut a piece of “fishtail” designer paper that measures 4 1/2 inches x 3 1/2 inches and adhere to the top front of the folded white card.

pulledgecat3wm

2. Cut a piece of “Cat” designer paper that measures 4 1/2 inches x 5 1/2 inches. Position the Circle Pull Card Edge as per photo above and run through die cutting machine.

  • Die cut a piece of brown card using the Circle Pull Card Edge and adhere this piece underneath the circle part of the designer paper so part of the brown card shows as a border.
  • Adhere designer paper to front of card.
3. Using the largest circles from the Twist Circle Pop Up Card die cut the stitched circle from white cardstock and the largest circle from brown cardstock. Layer circles together and attach to the circle area of front of card using foam tape.
4. Die cut and assemble Whiskers the Cat and attach to the circles.
5. Using the sentiment from the Just a Note Clear Stamp set, stamp using black ink onto white cardstock.
  • Die cut sentiment using the smaller labels from the Katie Label Pivot Card die set.
  • Adhere sentiment label to the lower left hand side of card so part of the label is off the card; trim edge.

pulledgecat2wm

6. Inside of Card –

  • Cut a piece of designer paper that measures 4 1/2 inches x 4 1/2 inches. Place the Circle Pull Card Edge at an angle at the top of the designer as we did for the front of the card.
  • Adhere designer paper to the lower inside of card.
  • Stamp the sentiment from the Occasions Clear Stamp Set using black ink to the circle area of card.

Thanks for stopping by today, I hope you enjoyed my tutorial.

 

Supplies:

Elizabeth Craft Designs – 

Other:
Cardstock – Grey; Pink; Green; Black; Brown; Teal
Designer Paper – Bella Blvd To Dye For 12 x 12 Paper; Kaisercraft Sea Breeze Collection Refresh & Sea 12 x 12 Paper;
Kaisercraft Furry Friends Collection 12 x 12 Paper
Ink – Black
Foam Tape
Die Cutting Machine
(Metal adaptor plate for die cutting Shimmer Sheetz)

You Might Also Like

5 Comments

  • Reply Birgit December 22, 2016 at 5:11 am

    These are so cute Frances! Lucky The Rabbit and Whiskers The Cat are so darling!!

  • Reply Kathleen Adams December 21, 2016 at 2:49 pm

    These are absolutely adorable! I love this new way to use my “Edges” set! Thanks Francis, you’re my crafty guru!

  • Reply Karen N December 21, 2016 at 1:25 pm

    What fun! TFS!

  • Reply Raquel December 21, 2016 at 11:14 am

    What a great use for the pull card edges set!

  • Reply Sandy Diller December 21, 2016 at 9:12 am

    Such great ideas and information. Wonderful tutorial!

  • Leave a Reply

    %d bloggers like this: