A Fun Easel Card using a Stand Up Helper

May 16, 2014

Hi, It’s Kelly Booth here. It has been a while since I made an easel card and wanted to give the Stand Up Helpers dies a try. They make it so easy for the easel to stand up and they come in so many different shapes too! I just love the Elizabeth Craft Designs Ladybugs Peel-Offs so wanted to use them for my card today. Hope you enjoy! πŸ™‚

-sPZJAJ7KeB3JqWYtd2zMRAgsxSfDTb6WlroQibiKBI

DSC_7057

1. Cut card base from red card stock, 11β€³ x 4-1/4β€³. Score across the center to form a 5-1/2β€³ x 4-1/4β€³ standard (A2) tall card. Make another score line across the center of the card front at 2-3/4β€³.

2. Score again at 2-3/4″ on the inside half then place the Flower Stand Up Helper on the edge of the score line in the middle and run it through your die cutting machine to make the stand up helper. Set this aside as this is your base for the card.

3. Take a piece of double-sided adhesive and place itΒ  one side on white card stock, peel off the other side and place one large and two small ladybug on the adhesive backed card stock. Then pour Warm Diamond Silk Microfine Glitter on the piece and polish the glitter to bring out the maximum sparkle, tap off excess and return it to the jar.

4.Color the ladybugs using Copic or other alcohol markers. Snip off the antennae when cutting them out.

5.Take pieces of wire and make a V then curl each end wrapping it around a rod, position the V under the ladybug and add a little glue and then put a piece of foam mounting tape on top of the wire and glue and set aside to dry.

6. Die cut The largest oval from the Accordion Oval Card set out of Blue Iris Shimmer Sheetz and run it through again using the stitched lines die from the same set. Remember to use the Metal Adaptor Plate when die cutting Shimmer Sheetz. Watch Els’s video HERE for more info.

7. Die cut a Flower Stand Up from the Blue Iris Shimmer Sheetz and snip it off.

8. Cut the sentiment from Black Velvet Adhesive using the large Happy Birthday and place it in the center of the oval.

9. Cut a piece of the Blue Iris Shimmer Sheetz 3 1/4″ by 4 1/4″ and emboss it using the Curvy Leaves Embossing Folder, then lightly sand the piece using a sanding block to bring the white core up.

10. Cut a piece of black card stock 3 1/2″ by 5.

11. Adhere the embossed Shimmer Sheetz to the black card stock.

12. Adhere the lower half of the panel to the red card base.

13. Adhere the Shimmer Sheetz flower to the stand up helper on the card.

14. Place one small and one large ladybug on the card front, using foam tape or double sided adhesive sheets to adhere.

15. Adhere the oval and remaining ladybug in front of the Stand Up Helper as shown in photo. (When the card is closed, a bit of this ladybug will peek out so you might need an envelope one size larger than the standard A2)

Now your Easel card is finished!

uYgJRzQYD-bBfh1OF6_sbhr-a2kOorjSkvZNw-THZOY

bNJ-yji_9rcqRveeB0EURywiMxpwM61lIMu9ahBJq-w

HERE is a really good Video of Els using the Stand up Helpers.

SUPPLIES

Elizabeth Craft Designs Supplies:

738 Happy Birthday
772 Accordion Oval Card
792 Stand Up Helpers
E105 Curvy Leaves Embossing Folder
SS 0103 Blue Iridescent Shimmer Sheetz
2341 Lady Bugs Peel-Offs
406 Black Velvet Adhesive Sheets
639 Warm Diamond Silk Microfine Glitter
501 Double Sided Adhesive Sheets 5Γ—12
803 Metal Adaptor Plate

Other Supplies:

Red and Black Card Stock
Die cutting Machine
Scissors
Glue
Adhesive
Copic Markers
Red Wire
Sanding Block

You Might Also Like

23 Comments

  • Reply Karen Aicken May 18, 2014 at 12:24 pm

    Kelly – I just adore this card. Those ladybugs you coloured would be great, but adding them as you did to an embossed Shimmer Sheetz? WONDERFUL!!!
    Cheers
    Karen

    • Reply Kelly Booth May 19, 2014 at 7:59 pm

      Thank you Karen…..xo

  • Reply Mary Prasad May 17, 2014 at 5:45 pm

    Really cute Kelly!

    • Reply Kelly Booth May 18, 2014 at 9:40 am

      Thank you Mary πŸ™‚

  • Reply Judi Kauffman May 16, 2014 at 8:52 pm

    A tip for beginners: If you don’t have a metal rod for winding the wire antennae, a toothpick or skinny skewer (like what people use for appetiers) would work just fine.

    • Reply Judi Kauffman May 16, 2014 at 8:53 pm

      Whoops…I meant appetizers. I hit the send button before I noticed

      • Reply Kelly Booth May 18, 2014 at 9:40 am

        Yes true Judi, thank You!

  • Reply Frances Byrne May 16, 2014 at 4:58 pm

    Another amazing Kelly creation, love the shimmer Sheetz background and the wire antenna

    • Reply Kelly Booth May 16, 2014 at 5:17 pm

      Thank You Frances XOXO

  • Reply donna mikasa May 16, 2014 at 12:43 pm

    Oh, so cuuuute~love those shimmery ladybugs!

    • Reply Kelly Booth May 16, 2014 at 12:54 pm

      Thanks D…..xoxoxo

  • Reply Sandra ltb May 16, 2014 at 12:35 pm

    lovely – thanks for the clear directions!
    Sandra ltb

    • Reply Kelly Booth May 16, 2014 at 5:17 pm

      Thank You Sandra!

  • Reply Joset van de Burgt May 16, 2014 at 12:24 pm

    Beautiful card Kelly!

    • Reply Kelly Booth May 16, 2014 at 12:46 pm

      Thank You Joset πŸ™‚

  • Reply Raquel Mason May 16, 2014 at 11:49 am

    So cute! I love the Shimmer Sheetz & the Ladybugs with wire antennas.

    • Reply Kelly Booth May 16, 2014 at 12:15 pm

      Thank You So Much Raquel….xo

  • Reply Rita Edwards May 16, 2014 at 10:51 am

    You know I’m a big fan of your creativity, Kelly and your card is fantastic again! I totally love the little red wire antennas, so clever! Xxx

    • Reply Kelly Booth May 16, 2014 at 12:14 pm

      You ALWAYS know how to make me Smile…..Thanks Rita xoxo

  • Reply Dotty Jo May 16, 2014 at 10:08 am

    Totally amazing! Jo x

    • Reply Kelly Booth May 16, 2014 at 12:13 pm

      Thank You Jo πŸ™‚ xoxoxo

  • Reply Suzanne May 16, 2014 at 9:34 am

    awesome lady bug card, love it

    • Reply Kelly Booth May 16, 2014 at 10:36 am

      Thank you So Much Suzanne!

    Leave a Reply

    %d bloggers like this: